switch-examples: Initial commit

This commit is contained in:
Spencer Vaughn 2023-02-22 06:26:01 -06:00
commit 4c3e4fd6d6
34 changed files with 91912 additions and 0 deletions

File diff suppressed because it is too large Load diff

View file

@ -0,0 +1,263 @@
/*******************************************************************************************
*
* reasings - raylib easings library, based on Robert Penner library
*
* Useful easing functions for values animation
*
* This header uses:
* #define REASINGS_STATIC_INLINE // Inlines all functions code, so it runs faster.
* // This requires lots of memory on system.
* How to use:
* The four inputs t,b,c,d are defined as follows:
* t = current time (in any unit measure, but same unit as duration)
* b = starting value to interpolate
* c = the total change in value of b that needs to occur
* d = total time it should take to complete (duration)
*
* Example:
*
* int currentTime = 0;
* int duration = 100;
* float startPositionX = 0.0f;
* float finalPositionX = 30.0f;
* float currentPositionX = startPositionX;
*
* while (currentPositionX < finalPositionX)
* {
* currentPositionX = EaseSineIn(currentTime, startPositionX, finalPositionX - startPositionX, duration);
* currentTime++;
* }
*
* A port of Robert Penner's easing equations to C (http://robertpenner.com/easing/)
*
* Robert Penner License
* ---------------------------------------------------------------------------------
* Open source under the BSD License.
*
* Copyright (c) 2001 Robert Penner. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* - Neither the name of the author nor the names of contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ---------------------------------------------------------------------------------
*
* Copyright (c) 2015-2022 Ramon Santamaria (@raysan5)
*
* This software is provided "as-is", without any express or implied warranty. In no event
* will the authors be held liable for any damages arising from the use of this software.
*
* Permission is granted to anyone to use this software for any purpose, including commercial
* applications, and to alter it and redistribute it freely, subject to the following restrictions:
*
* 1. The origin of this software must not be misrepresented; you must not claim that you
* wrote the original software. If you use this software in a product, an acknowledgment
* in the product documentation would be appreciated but is not required.
*
* 2. Altered source versions must be plainly marked as such, and must not be misrepresented
* as being the original software.
*
* 3. This notice may not be removed or altered from any source distribution.
*
**********************************************************************************************/
#ifndef REASINGS_H
#define REASINGS_H
#define REASINGS_STATIC_INLINE // NOTE: By default, compile functions as static inline
#if defined(REASINGS_STATIC_INLINE)
#define EASEDEF static inline
#else
#define EASEDEF extern
#endif
#include <math.h> // Required for: sinf(), cosf(), sqrtf(), powf()
#ifndef PI
#define PI 3.14159265358979323846f //Required as PI is not always defined in math.h
#endif
#if defined(__cplusplus)
extern "C" { // Prevents name mangling of functions
#endif
// Linear Easing functions
EASEDEF float EaseLinearNone(float t, float b, float c, float d) { return (c*t/d + b); } // Ease: Linear
EASEDEF float EaseLinearIn(float t, float b, float c, float d) { return (c*t/d + b); } // Ease: Linear In
EASEDEF float EaseLinearOut(float t, float b, float c, float d) { return (c*t/d + b); } // Ease: Linear Out
EASEDEF float EaseLinearInOut(float t, float b, float c, float d) { return (c*t/d + b); } // Ease: Linear In Out
// Sine Easing functions
EASEDEF float EaseSineIn(float t, float b, float c, float d) { return (-c*cosf(t/d*(PI/2.0f)) + c + b); } // Ease: Sine In
EASEDEF float EaseSineOut(float t, float b, float c, float d) { return (c*sinf(t/d*(PI/2.0f)) + b); } // Ease: Sine Out
EASEDEF float EaseSineInOut(float t, float b, float c, float d) { return (-c/2.0f*(cosf(PI*t/d) - 1.0f) + b); } // Ease: Sine In Out
// Circular Easing functions
EASEDEF float EaseCircIn(float t, float b, float c, float d) { t /= d; return (-c*(sqrtf(1.0f - t*t) - 1.0f) + b); } // Ease: Circular In
EASEDEF float EaseCircOut(float t, float b, float c, float d) { t = t/d - 1.0f; return (c*sqrtf(1.0f - t*t) + b); } // Ease: Circular Out
EASEDEF float EaseCircInOut(float t, float b, float c, float d) // Ease: Circular In Out
{
if ((t/=d/2.0f) < 1.0f) return (-c/2.0f*(sqrtf(1.0f - t*t) - 1.0f) + b);
t -= 2.0f; return (c/2.0f*(sqrtf(1.0f - t*t) + 1.0f) + b);
}
// Cubic Easing functions
EASEDEF float EaseCubicIn(float t, float b, float c, float d) { t /= d; return (c*t*t*t + b); } // Ease: Cubic In
EASEDEF float EaseCubicOut(float t, float b, float c, float d) { t = t/d - 1.0f; return (c*(t*t*t + 1.0f) + b); } // Ease: Cubic Out
EASEDEF float EaseCubicInOut(float t, float b, float c, float d) // Ease: Cubic In Out
{
if ((t/=d/2.0f) < 1.0f) return (c/2.0f*t*t*t + b);
t -= 2.0f; return (c/2.0f*(t*t*t + 2.0f) + b);
}
// Quadratic Easing functions
EASEDEF float EaseQuadIn(float t, float b, float c, float d) { t /= d; return (c*t*t + b); } // Ease: Quadratic In
EASEDEF float EaseQuadOut(float t, float b, float c, float d) { t /= d; return (-c*t*(t - 2.0f) + b); } // Ease: Quadratic Out
EASEDEF float EaseQuadInOut(float t, float b, float c, float d) // Ease: Quadratic In Out
{
if ((t/=d/2) < 1) return (((c/2)*(t*t)) + b);
return (-c/2.0f*(((t - 1.0f)*(t - 3.0f)) - 1.0f) + b);
}
// Exponential Easing functions
EASEDEF float EaseExpoIn(float t, float b, float c, float d) { return (t == 0.0f) ? b : (c*powf(2.0f, 10.0f*(t/d - 1.0f)) + b); } // Ease: Exponential In
EASEDEF float EaseExpoOut(float t, float b, float c, float d) { return (t == d) ? (b + c) : (c*(-powf(2.0f, -10.0f*t/d) + 1.0f) + b); } // Ease: Exponential Out
EASEDEF float EaseExpoInOut(float t, float b, float c, float d) // Ease: Exponential In Out
{
if (t == 0.0f) return b;
if (t == d) return (b + c);
if ((t/=d/2.0f) < 1.0f) return (c/2.0f*powf(2.0f, 10.0f*(t - 1.0f)) + b);
return (c/2.0f*(-powf(2.0f, -10.0f*(t - 1.0f)) + 2.0f) + b);
}
// Back Easing functions
EASEDEF float EaseBackIn(float t, float b, float c, float d) // Ease: Back In
{
float s = 1.70158f;
float postFix = t/=d;
return (c*(postFix)*t*((s + 1.0f)*t - s) + b);
}
EASEDEF float EaseBackOut(float t, float b, float c, float d) // Ease: Back Out
{
float s = 1.70158f;
t = t/d - 1.0f;
return (c*(t*t*((s + 1.0f)*t + s) + 1.0f) + b);
}
EASEDEF float EaseBackInOut(float t, float b, float c, float d) // Ease: Back In Out
{
float s = 1.70158f;
if ((t/=d/2.0f) < 1.0f)
{
s *= 1.525f;
return (c/2.0f*(t*t*((s + 1.0f)*t - s)) + b);
}
float postFix = t-=2.0f;
s *= 1.525f;
return (c/2.0f*((postFix)*t*((s + 1.0f)*t + s) + 2.0f) + b);
}
// Bounce Easing functions
EASEDEF float EaseBounceOut(float t, float b, float c, float d) // Ease: Bounce Out
{
if ((t/=d) < (1.0f/2.75f))
{
return (c*(7.5625f*t*t) + b);
}
else if (t < (2.0f/2.75f))
{
float postFix = t-=(1.5f/2.75f);
return (c*(7.5625f*(postFix)*t + 0.75f) + b);
}
else if (t < (2.5/2.75))
{
float postFix = t-=(2.25f/2.75f);
return (c*(7.5625f*(postFix)*t + 0.9375f) + b);
}
else
{
float postFix = t-=(2.625f/2.75f);
return (c*(7.5625f*(postFix)*t + 0.984375f) + b);
}
}
EASEDEF float EaseBounceIn(float t, float b, float c, float d) { return (c - EaseBounceOut(d - t, 0.0f, c, d) + b); } // Ease: Bounce In
EASEDEF float EaseBounceInOut(float t, float b, float c, float d) // Ease: Bounce In Out
{
if (t < d/2.0f) return (EaseBounceIn(t*2.0f, 0.0f, c, d)*0.5f + b);
else return (EaseBounceOut(t*2.0f - d, 0.0f, c, d)*0.5f + c*0.5f + b);
}
// Elastic Easing functions
EASEDEF float EaseElasticIn(float t, float b, float c, float d) // Ease: Elastic In
{
if (t == 0.0f) return b;
if ((t/=d) == 1.0f) return (b + c);
float p = d*0.3f;
float a = c;
float s = p/4.0f;
float postFix = a*powf(2.0f, 10.0f*(t-=1.0f));
return (-(postFix*sinf((t*d-s)*(2.0f*PI)/p )) + b);
}
EASEDEF float EaseElasticOut(float t, float b, float c, float d) // Ease: Elastic Out
{
if (t == 0.0f) return b;
if ((t/=d) == 1.0f) return (b + c);
float p = d*0.3f;
float a = c;
float s = p/4.0f;
return (a*powf(2.0f,-10.0f*t)*sinf((t*d-s)*(2.0f*PI)/p) + c + b);
}
EASEDEF float EaseElasticInOut(float t, float b, float c, float d) // Ease: Elastic In Out
{
if (t == 0.0f) return b;
if ((t/=d/2.0f) == 2.0f) return (b + c);
float p = d*(0.3f*1.5f);
float a = c;
float s = p/4.0f;
if (t < 1.0f)
{
float postFix = a*powf(2.0f, 10.0f*(t-=1.0f));
return -0.5f*(postFix*sinf((t*d-s)*(2.0f*PI)/p)) + b;
}
float postFix = a*powf(2.0f, -10.0f*(t-=1.0f));
return (postFix*sinf((t*d-s)*(2.0f*PI)/p)*0.5f + c + b);
}
#if defined(__cplusplus)
}
#endif
#endif // REASINGS_H

View file

@ -0,0 +1,86 @@
/*******************************************************************************************
*
* raylib [shapes] example - Draw basic shapes 2d (rectangle, circle, line...)
*
* Example originally created with raylib 1.0, last time updated with raylib 4.2
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2014-2022 Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include "raylib.h"
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//--------------------------------------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - basic shapes drawing");
float rotation = 0.0f;
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//--------------------------------------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//----------------------------------------------------------------------------------
rotation += 0.2f;
//----------------------------------------------------------------------------------
// Draw
//----------------------------------------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
DrawText("some basic shapes available on raylib", 20, 20, 20, DARKGRAY);
// Circle shapes and lines
DrawCircle(screenWidth/5, 120, 35, DARKBLUE);
DrawCircleGradient(screenWidth/5, 220, 60, GREEN, SKYBLUE);
DrawCircleLines(screenWidth/5, 340, 80, DARKBLUE);
// Rectangle shapes and lines
DrawRectangle(screenWidth/4*2 - 60, 100, 120, 60, RED);
DrawRectangleGradientH(screenWidth/4*2 - 90, 170, 180, 130, MAROON, GOLD);
DrawRectangleLines(screenWidth/4*2 - 40, 320, 80, 60, ORANGE); // NOTE: Uses QUADS internally, not lines
// Triangle shapes and lines
DrawTriangle((Vector2){ screenWidth/4.0f *3.0f, 80.0f },
(Vector2){ screenWidth/4.0f *3.0f - 60.0f, 150.0f },
(Vector2){ screenWidth/4.0f *3.0f + 60.0f, 150.0f }, VIOLET);
DrawTriangleLines((Vector2){ screenWidth/4.0f*3.0f, 160.0f },
(Vector2){ screenWidth/4.0f*3.0f - 20.0f, 230.0f },
(Vector2){ screenWidth/4.0f*3.0f + 20.0f, 230.0f }, DARKBLUE);
// Polygon shapes and lines
DrawPoly((Vector2){ screenWidth/4.0f*3, 330 }, 6, 80, rotation, BROWN);
DrawPolyLines((Vector2){ screenWidth/4.0f*3, 330 }, 6, 90, rotation, BROWN);
DrawPolyLinesEx((Vector2){ screenWidth/4.0f*3, 330 }, 6, 85, rotation, 6, BEIGE);
// NOTE: We draw all LINES based shapes together to optimize internal drawing,
// this way, all LINES are rendered in a single draw pass
DrawLine(18, 42, screenWidth - 18, 42, BLACK);
EndDrawing();
//----------------------------------------------------------------------------------
}
// De-Initialization
//--------------------------------------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//--------------------------------------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 30 KiB

View file

@ -0,0 +1,81 @@
/*******************************************************************************************
*
* raylib [shapes] example - bouncing ball
*
* Example originally created with raylib 2.5, last time updated with raylib 2.5
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2013-2022 Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include "raylib.h"
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//---------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - bouncing ball");
Vector2 ballPosition = { GetScreenWidth()/2.0f, GetScreenHeight()/2.0f };
Vector2 ballSpeed = { 5.0f, 4.0f };
int ballRadius = 20;
bool pause = 0;
int framesCounter = 0;
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//----------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//-----------------------------------------------------
if (IsKeyPressed(KEY_SPACE)) pause = !pause;
if (!pause)
{
ballPosition.x += ballSpeed.x;
ballPosition.y += ballSpeed.y;
// Check walls collision for bouncing
if ((ballPosition.x >= (GetScreenWidth() - ballRadius)) || (ballPosition.x <= ballRadius)) ballSpeed.x *= -1.0f;
if ((ballPosition.y >= (GetScreenHeight() - ballRadius)) || (ballPosition.y <= ballRadius)) ballSpeed.y *= -1.0f;
}
else framesCounter++;
//-----------------------------------------------------
// Draw
//-----------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
DrawCircleV(ballPosition, (float)ballRadius, MAROON);
DrawText("PRESS SPACE to PAUSE BALL MOVEMENT", 10, GetScreenHeight() - 25, 20, LIGHTGRAY);
// On pause, we draw a blinking message
if (pause && ((framesCounter/30)%2)) DrawText("PAUSED", 350, 200, 30, GRAY);
DrawFPS(10, 10);
EndDrawing();
//-----------------------------------------------------
}
// De-Initialization
//---------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//----------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 15 KiB

View file

@ -0,0 +1,114 @@
/*******************************************************************************************
*
* raylib [shapes] example - collision area
*
* Example originally created with raylib 2.5, last time updated with raylib 2.5
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2013-2022 Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include "raylib.h"
#include <stdlib.h> // Required for: abs()
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//---------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - collision area");
// Box A: Moving box
Rectangle boxA = { 10, GetScreenHeight()/2.0f - 50, 200, 100 };
int boxASpeedX = 4;
// Box B: Mouse moved box
Rectangle boxB = { GetScreenWidth()/2.0f - 30, GetScreenHeight()/2.0f - 30, 60, 60 };
Rectangle boxCollision = { 0 }; // Collision rectangle
int screenUpperLimit = 40; // Top menu limits
bool pause = false; // Movement pause
bool collision = false; // Collision detection
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//----------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//-----------------------------------------------------
// Move box if not paused
if (!pause) boxA.x += boxASpeedX;
// Bounce box on x screen limits
if (((boxA.x + boxA.width) >= GetScreenWidth()) || (boxA.x <= 0)) boxASpeedX *= -1;
// Update player-controlled-box (box02)
boxB.x = GetMouseX() - boxB.width/2;
boxB.y = GetMouseY() - boxB.height/2;
// Make sure Box B does not go out of move area limits
if ((boxB.x + boxB.width) >= GetScreenWidth()) boxB.x = GetScreenWidth() - boxB.width;
else if (boxB.x <= 0) boxB.x = 0;
if ((boxB.y + boxB.height) >= GetScreenHeight()) boxB.y = GetScreenHeight() - boxB.height;
else if (boxB.y <= screenUpperLimit) boxB.y = (float)screenUpperLimit;
// Check boxes collision
collision = CheckCollisionRecs(boxA, boxB);
// Get collision rectangle (only on collision)
if (collision) boxCollision = GetCollisionRec(boxA, boxB);
// Pause Box A movement
if (IsKeyPressed(KEY_SPACE)) pause = !pause;
//-----------------------------------------------------
// Draw
//-----------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
DrawRectangle(0, 0, screenWidth, screenUpperLimit, collision? RED : BLACK);
DrawRectangleRec(boxA, GOLD);
DrawRectangleRec(boxB, BLUE);
if (collision)
{
// Draw collision area
DrawRectangleRec(boxCollision, LIME);
// Draw collision message
DrawText("COLLISION!", GetScreenWidth()/2 - MeasureText("COLLISION!", 20)/2, screenUpperLimit/2 - 10, 20, BLACK);
// Draw collision area
DrawText(TextFormat("Collision Area: %i", (int)boxCollision.width*(int)boxCollision.height), GetScreenWidth()/2 - 100, screenUpperLimit + 10, 20, BLACK);
}
DrawFPS(10, 10);
EndDrawing();
//-----------------------------------------------------
}
// De-Initialization
//---------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//----------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 15 KiB

View file

@ -0,0 +1,104 @@
/*******************************************************************************************
*
* raylib [shapes] example - Colors palette
*
* Example originally created with raylib 1.0, last time updated with raylib 2.5
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2014-2022 Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include "raylib.h"
#define MAX_COLORS_COUNT 21 // Number of colors available
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//--------------------------------------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - colors palette");
Color colors[MAX_COLORS_COUNT] = {
DARKGRAY, MAROON, ORANGE, DARKGREEN, DARKBLUE, DARKPURPLE, DARKBROWN,
GRAY, RED, GOLD, LIME, BLUE, VIOLET, BROWN, LIGHTGRAY, PINK, YELLOW,
GREEN, SKYBLUE, PURPLE, BEIGE };
const char *colorNames[MAX_COLORS_COUNT] = {
"DARKGRAY", "MAROON", "ORANGE", "DARKGREEN", "DARKBLUE", "DARKPURPLE",
"DARKBROWN", "GRAY", "RED", "GOLD", "LIME", "BLUE", "VIOLET", "BROWN",
"LIGHTGRAY", "PINK", "YELLOW", "GREEN", "SKYBLUE", "PURPLE", "BEIGE" };
Rectangle colorsRecs[MAX_COLORS_COUNT] = { 0 }; // Rectangles array
// Fills colorsRecs data (for every rectangle)
for (int i = 0; i < MAX_COLORS_COUNT; i++)
{
colorsRecs[i].x = 20.0f + 100.0f *(i%7) + 10.0f *(i%7);
colorsRecs[i].y = 80.0f + 100.0f *(i/7) + 10.0f *(i/7);
colorsRecs[i].width = 100.0f;
colorsRecs[i].height = 100.0f;
}
int colorState[MAX_COLORS_COUNT] = { 0 }; // Color state: 0-DEFAULT, 1-MOUSE_HOVER
Vector2 mousePoint = { 0.0f, 0.0f };
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//--------------------------------------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//----------------------------------------------------------------------------------
mousePoint = GetMousePosition();
for (int i = 0; i < MAX_COLORS_COUNT; i++)
{
if (CheckCollisionPointRec(mousePoint, colorsRecs[i])) colorState[i] = 1;
else colorState[i] = 0;
}
//----------------------------------------------------------------------------------
// Draw
//----------------------------------------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
DrawText("raylib colors palette", 28, 42, 20, BLACK);
DrawText("press SPACE to see all colors", GetScreenWidth() - 180, GetScreenHeight() - 40, 10, GRAY);
for (int i = 0; i < MAX_COLORS_COUNT; i++) // Draw all rectangles
{
DrawRectangleRec(colorsRecs[i], Fade(colors[i], colorState[i]? 0.6f : 1.0f));
if (IsKeyDown(KEY_SPACE) || colorState[i])
{
DrawRectangle((int)colorsRecs[i].x, (int)(colorsRecs[i].y + colorsRecs[i].height - 26), (int)colorsRecs[i].width, 20, BLACK);
DrawRectangleLinesEx(colorsRecs[i], 6, Fade(BLACK, 0.3f));
DrawText(colorNames[i], (int)(colorsRecs[i].x + colorsRecs[i].width - MeasureText(colorNames[i], 10) - 12),
(int)(colorsRecs[i].y + colorsRecs[i].height - 20), 10, colors[i]);
}
}
EndDrawing();
//----------------------------------------------------------------------------------
}
// De-Initialization
//--------------------------------------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//--------------------------------------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 18 KiB

View file

@ -0,0 +1,88 @@
/*******************************************************************************************
*
* raylib [shapes] example - draw circle sector (with gui options)
*
* Example originally created with raylib 2.5, last time updated with raylib 2.5
*
* Example contributed by Vlad Adrian (@demizdor) and reviewed by Ramon Santamaria (@raysan5)
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2018-2022 Vlad Adrian (@demizdor) and Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include <raylib.h>
#define RAYGUI_IMPLEMENTATION
#include "raygui.h" // Required for GUI controls
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//--------------------------------------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - draw circle sector");
Vector2 center = {(GetScreenWidth() - 300)/2.0f, GetScreenHeight()/2.0f };
float outerRadius = 180.0f;
float startAngle = 0.0f;
float endAngle = 180.0f;
int segments = 0;
int minSegments = 4;
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//--------------------------------------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//----------------------------------------------------------------------------------
// NOTE: All variables update happens inside GUI control functions
//----------------------------------------------------------------------------------
// Draw
//----------------------------------------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
DrawLine(500, 0, 500, GetScreenHeight(), Fade(LIGHTGRAY, 0.6f));
DrawRectangle(500, 0, GetScreenWidth() - 500, GetScreenHeight(), Fade(LIGHTGRAY, 0.3f));
DrawCircleSector(center, outerRadius, startAngle, endAngle, segments, Fade(MAROON, 0.3f));
DrawCircleSectorLines(center, outerRadius, startAngle, endAngle, segments, Fade(MAROON, 0.6f));
// Draw GUI controls
//------------------------------------------------------------------------------
startAngle = GuiSliderBar((Rectangle){ 600, 40, 120, 20}, "StartAngle", NULL, startAngle, 0, 720);
endAngle = GuiSliderBar((Rectangle){ 600, 70, 120, 20}, "EndAngle", NULL, endAngle, 0, 720);
outerRadius = GuiSliderBar((Rectangle){ 600, 140, 120, 20}, "Radius", NULL, outerRadius, 0, 200);
segments = (int)GuiSliderBar((Rectangle){ 600, 170, 120, 20}, "Segments", NULL, (float)segments, 0, 100);
//------------------------------------------------------------------------------
minSegments = (int)ceilf((endAngle - startAngle) / 90);
DrawText(TextFormat("MODE: %s", (segments >= minSegments)? "MANUAL" : "AUTO"), 600, 200, 10, (segments >= minSegments)? MAROON : DARKGRAY);
DrawFPS(10, 10);
EndDrawing();
//----------------------------------------------------------------------------------
}
// De-Initialization
//--------------------------------------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//--------------------------------------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 18 KiB

View file

@ -0,0 +1,94 @@
/*******************************************************************************************
*
* raylib [shapes] example - draw rectangle rounded (with gui options)
*
* Example originally created with raylib 2.5, last time updated with raylib 2.5
*
* Example contributed by Vlad Adrian (@demizdor) and reviewed by Ramon Santamaria (@raysan5)
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2018-2022 Vlad Adrian (@demizdor) and Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include <raylib.h>
#define RAYGUI_IMPLEMENTATION
#include "raygui.h" // Required for GUI controls
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//--------------------------------------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - draw rectangle rounded");
float roundness = 0.2f;
int width = 200;
int height = 100;
int segments = 0;
int lineThick = 1;
bool drawRect = false;
bool drawRoundedRect = true;
bool drawRoundedLines = false;
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//--------------------------------------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//----------------------------------------------------------------------------------
Rectangle rec = { ((float)GetScreenWidth() - width - 250)/2, (GetScreenHeight() - height)/2.0f, (float)width, (float)height };
//----------------------------------------------------------------------------------
// Draw
//----------------------------------------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
DrawLine(560, 0, 560, GetScreenHeight(), Fade(LIGHTGRAY, 0.6f));
DrawRectangle(560, 0, GetScreenWidth() - 500, GetScreenHeight(), Fade(LIGHTGRAY, 0.3f));
if (drawRect) DrawRectangleRec(rec, Fade(GOLD, 0.6f));
if (drawRoundedRect) DrawRectangleRounded(rec, roundness, segments, Fade(MAROON, 0.2f));
if (drawRoundedLines) DrawRectangleRoundedLines(rec,roundness, segments, (float)lineThick, Fade(MAROON, 0.4f));
// Draw GUI controls
//------------------------------------------------------------------------------
width = (int)GuiSliderBar((Rectangle){ 640, 40, 105, 20 }, "Width", NULL, (float)width, 0, (float)GetScreenWidth() - 300);
height = (int)GuiSliderBar((Rectangle){ 640, 70, 105, 20 }, "Height", NULL, (float)height, 0, (float)GetScreenHeight() - 50);
roundness = GuiSliderBar((Rectangle){ 640, 140, 105, 20 }, "Roundness", NULL, roundness, 0.0f, 1.0f);
lineThick = (int)GuiSliderBar((Rectangle){ 640, 170, 105, 20 }, "Thickness", NULL, (float)lineThick, 0, 20);
segments = (int)GuiSliderBar((Rectangle){ 640, 240, 105, 20}, "Segments", NULL, (float)segments, 0, 60);
drawRoundedRect = GuiCheckBox((Rectangle){ 640, 320, 20, 20 }, "DrawRoundedRect", drawRoundedRect);
drawRoundedLines = GuiCheckBox((Rectangle){ 640, 350, 20, 20 }, "DrawRoundedLines", drawRoundedLines);
drawRect = GuiCheckBox((Rectangle){ 640, 380, 20, 20}, "DrawRect", drawRect);
//------------------------------------------------------------------------------
DrawText(TextFormat("MODE: %s", (segments >= 4)? "MANUAL" : "AUTO"), 640, 280, 10, (segments >= 4)? MAROON : DARKGRAY);
DrawFPS(10, 10);
EndDrawing();
//----------------------------------------------------------------------------------
}
// De-Initialization
//--------------------------------------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//--------------------------------------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 18 KiB

View file

@ -0,0 +1,100 @@
/*******************************************************************************************
*
* raylib [shapes] example - draw ring (with gui options)
*
* Example originally created with raylib 2.5, last time updated with raylib 2.5
*
* Example contributed by Vlad Adrian (@demizdor) and reviewed by Ramon Santamaria (@raysan5)
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2018-2022 Vlad Adrian (@demizdor) and Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include <raylib.h>
#define RAYGUI_IMPLEMENTATION
#include "raygui.h" // Required for GUI controls
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//--------------------------------------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - draw ring");
Vector2 center = {(GetScreenWidth() - 300)/2.0f, GetScreenHeight()/2.0f };
float innerRadius = 80.0f;
float outerRadius = 190.0f;
float startAngle = 0.0f;
float endAngle = 360.0f;
int segments = 0;
bool drawRing = true;
bool drawRingLines = false;
bool drawCircleLines = false;
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//--------------------------------------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//----------------------------------------------------------------------------------
// NOTE: All variables update happens inside GUI control functions
//----------------------------------------------------------------------------------
// Draw
//----------------------------------------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
DrawLine(500, 0, 500, GetScreenHeight(), Fade(LIGHTGRAY, 0.6f));
DrawRectangle(500, 0, GetScreenWidth() - 500, GetScreenHeight(), Fade(LIGHTGRAY, 0.3f));
if (drawRing) DrawRing(center, innerRadius, outerRadius, startAngle, endAngle, segments, Fade(MAROON, 0.3f));
if (drawRingLines) DrawRingLines(center, innerRadius, outerRadius, startAngle, endAngle, segments, Fade(BLACK, 0.4f));
if (drawCircleLines) DrawCircleSectorLines(center, outerRadius, startAngle, endAngle, segments, Fade(BLACK, 0.4f));
// Draw GUI controls
//------------------------------------------------------------------------------
startAngle = GuiSliderBar((Rectangle){ 600, 40, 120, 20 }, "StartAngle", NULL, startAngle, -450, 450);
endAngle = GuiSliderBar((Rectangle){ 600, 70, 120, 20 }, "EndAngle", NULL, endAngle, -450, 450);
innerRadius = GuiSliderBar((Rectangle){ 600, 140, 120, 20 }, "InnerRadius", NULL, innerRadius, 0, 100);
outerRadius = GuiSliderBar((Rectangle){ 600, 170, 120, 20 }, "OuterRadius", NULL, outerRadius, 0, 200);
segments = (int)GuiSliderBar((Rectangle){ 600, 240, 120, 20 }, "Segments", NULL, (float)segments, 0, 100);
drawRing = GuiCheckBox((Rectangle){ 600, 320, 20, 20 }, "Draw Ring", drawRing);
drawRingLines = GuiCheckBox((Rectangle){ 600, 350, 20, 20 }, "Draw RingLines", drawRingLines);
drawCircleLines = GuiCheckBox((Rectangle){ 600, 380, 20, 20 }, "Draw CircleLines", drawCircleLines);
//------------------------------------------------------------------------------
int minSegments = (int)ceilf((endAngle - startAngle)/90);
DrawText(TextFormat("MODE: %s", (segments >= minSegments)? "MANUAL" : "AUTO"), 600, 270, 10, (segments >= minSegments)? MAROON : DARKGRAY);
DrawFPS(10, 10);
EndDrawing();
//----------------------------------------------------------------------------------
}
// De-Initialization
//--------------------------------------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//--------------------------------------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 21 KiB

View file

@ -0,0 +1,115 @@
/*******************************************************************************************
*
* raylib [shapes] example - easings ball anim
*
* Example originally created with raylib 2.5, last time updated with raylib 2.5
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2014-2022 Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include "raylib.h"
#include "reasings.h" // Required for easing functions
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//--------------------------------------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - easings ball anim");
// Ball variable value to be animated with easings
int ballPositionX = -100;
int ballRadius = 20;
float ballAlpha = 0.0f;
int state = 0;
int framesCounter = 0;
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//--------------------------------------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//----------------------------------------------------------------------------------
if (state == 0) // Move ball position X with easing
{
framesCounter++;
ballPositionX = (int)EaseElasticOut((float)framesCounter, -100, screenWidth/2.0f + 100, 120);
if (framesCounter >= 120)
{
framesCounter = 0;
state = 1;
}
}
else if (state == 1) // Increase ball radius with easing
{
framesCounter++;
ballRadius = (int)EaseElasticIn((float)framesCounter, 20, 500, 200);
if (framesCounter >= 200)
{
framesCounter = 0;
state = 2;
}
}
else if (state == 2) // Change ball alpha with easing (background color blending)
{
framesCounter++;
ballAlpha = EaseCubicOut((float)framesCounter, 0.0f, 1.0f, 200);
if (framesCounter >= 200)
{
framesCounter = 0;
state = 3;
}
}
else if (state == 3) // Reset state to play again
{
if (IsKeyPressed(KEY_ENTER))
{
// Reset required variables to play again
ballPositionX = -100;
ballRadius = 20;
ballAlpha = 0.0f;
state = 0;
}
}
if (IsKeyPressed(KEY_R)) framesCounter = 0;
//----------------------------------------------------------------------------------
// Draw
//----------------------------------------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
if (state >= 2) DrawRectangle(0, 0, screenWidth, screenHeight, GREEN);
DrawCircle(ballPositionX, 200, (float)ballRadius, Fade(RED, 1.0f - ballAlpha));
if (state == 3) DrawText("PRESS [ENTER] TO PLAY AGAIN!", 240, 200, 20, BLACK);
EndDrawing();
//----------------------------------------------------------------------------------
}
// De-Initialization
//--------------------------------------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//--------------------------------------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 15 KiB

View file

@ -0,0 +1,141 @@
/*******************************************************************************************
*
* raylib [shapes] example - easings box anim
*
* Example originally created with raylib 2.5, last time updated with raylib 2.5
*
* Example licensed under an unmodified zlib/libpng license, which is an OSI-certified,
* BSD-like license that allows static linking with closed source software
*
* Copyright (c) 2014-2022 Ramon Santamaria (@raysan5)
*
********************************************************************************************/
#include "raylib.h"
#include "reasings.h" // Required for easing functions
//------------------------------------------------------------------------------------
// Program main entry point
//------------------------------------------------------------------------------------
int main(void)
{
// Initialization
//--------------------------------------------------------------------------------------
const int screenWidth = 800;
const int screenHeight = 450;
InitWindow(screenWidth, screenHeight, "raylib [shapes] example - easings box anim");
// Box variables to be animated with easings
Rectangle rec = { GetScreenWidth()/2.0f, -100, 100, 100 };
float rotation = 0.0f;
float alpha = 1.0f;
int state = 0;
int framesCounter = 0;
SetTargetFPS(60); // Set our game to run at 60 frames-per-second
//--------------------------------------------------------------------------------------
// Main game loop
while (!WindowShouldClose()) // Detect window close button or ESC key
{
// Update
//----------------------------------------------------------------------------------
switch (state)
{
case 0: // Move box down to center of screen
{
framesCounter++;
// NOTE: Remember that 3rd parameter of easing function refers to
// desired value variation, do not confuse it with expected final value!
rec.y = EaseElasticOut((float)framesCounter, -100, GetScreenHeight()/2.0f + 100, 120);
if (framesCounter >= 120)
{
framesCounter = 0;
state = 1;
}
} break;
case 1: // Scale box to an horizontal bar
{
framesCounter++;
rec.height = EaseBounceOut((float)framesCounter, 100, -90, 120);
rec.width = EaseBounceOut((float)framesCounter, 100, (float)GetScreenWidth(), 120);
if (framesCounter >= 120)
{
framesCounter = 0;
state = 2;
}
} break;
case 2: // Rotate horizontal bar rectangle
{
framesCounter++;
rotation = EaseQuadOut((float)framesCounter, 0.0f, 270.0f, 240);
if (framesCounter >= 240)
{
framesCounter = 0;
state = 3;
}
} break;
case 3: // Increase bar size to fill all screen
{
framesCounter++;
rec.height = EaseCircOut((float)framesCounter, 10, (float)GetScreenWidth(), 120);
if (framesCounter >= 120)
{
framesCounter = 0;
state = 4;
}
} break;
case 4: // Fade out animation
{
framesCounter++;
alpha = EaseSineOut((float)framesCounter, 1.0f, -1.0f, 160);
if (framesCounter >= 160)
{
framesCounter = 0;
state = 5;
}
} break;
default: break;
}
// Reset animation at any moment
if (IsKeyPressed(KEY_SPACE))
{
rec = (Rectangle){ GetScreenWidth()/2.0f, -100, 100, 100 };
rotation = 0.0f;
alpha = 1.0f;
state = 0;
framesCounter = 0;
}
//----------------------------------------------------------------------------------
// Draw
//----------------------------------------------------------------------------------
BeginDrawing();
ClearBackground(RAYWHITE);
DrawRectanglePro(rec, (Vector2){ rec.width/2, rec.height/2 }, rotation, Fade(BLACK, alpha));
DrawText("PRESS [SPACE] TO RESET BOX ANIMATION!", 10, GetScreenHeight() - 25, 20, LIGHTGRAY);
EndDrawing();
//----------------------------------------------------------------------------------
}
// De-Initialization
//--------------------------------------------------------------------------------------
CloseWindow(); // Close window and OpenGL context
//--------------------------------------------------------------------------------------
return 0;
}

Binary file not shown.

After

Width:  |  Height:  |  Size: 15 KiB

Some files were not shown because too many files have changed in this diff Show more